Skip to main content

Month: December 2023

Tips to Avoid Needing Emergency Plumbing Services

Water damage restoration is one of the most common services we get called out for, but there are ways to avoid needing an emergency plumbing service and a restoration company. Plumbing mishaps are, of course, just one cause of floods. However, a burst pipe or drain overflow can be quite disruptive. You can avoid needing a plumber or emergency restoration company with the following tips:

  • Discard Fats, Oils, and Grease in the Trash: These may be a liquid when you pour them down your sink, but fatty materials become sticker and more solid as they cool. Inside your drain line, they stick to pipe walls and capture other debris to form a clog. 
  • Be Mindful of What You Flush: Flushing anything other than toilet paper down a toilet is one of the fastest ways to need an emergency plumbing professional. Never flush paper towels, personal hygiene products, or solid objects. Also, avoid sending “flushable” wipes down the toilet, as they don’t break down enough to avoid clogs (don’t use drop-in toilet bowl cleaners either).
  • Know What Not to Put in the Garbage Disposal: The disposal may seem like a convenient way to get rid of all your food waste. However, it’s not suited for everything. Celery, banana peels, corn husks, and other fibrous fruits and vegetables should be thrown in the trash. Also, avoid putting eggshells, coffee grounds, onions, potatoes, and bones in your garbage disposal to prevent a clogged sink.
  • Avoid Using Chemical Drain Cleaners: Check the label if you use consumer drain cleaners. Many of them have harsh chemicals that can, aside from eating through clogs, cause pipe materials to deteriorate. A baking soda and vinegar mixture can be helpful for the occasional clog. However, if you have frequent clogs, it’s best to call a plumber to avoid bigger problems, and also consider routine plumbing inspections and preventative drain cleanings.
  • Locate Your Water Shut-Off Valve: There are many ways to prevent or reduce the risk of plumbing problems. However, unexpected things do happen. If you know where the shut-off valve is and how to use it, you can act quickly to stop the flow when a pipe bursts. You may get away with sopping up the mess with some towels. This doesn’t avoid needing an emergency plumber but can avoid requiring a floor or ceiling replacement.
  • Check for Leaks Regularly: Small leaks and even dripping faucets can waste hundreds of dollars. And no matter how small the amount of water leaking, it can do plenty of damage. A small leak, whether from a faucet handle, fridge, dishwasher, washing machine, or pipe connected to your sink or toilet, can precede a major plumbing failure. Also, check outdoor hoses and valves. Looking for leaks at least once a month can help you know when to call for minor repairs instead of an emergency plumbing service.
  • Don’t Ignore Changes in Water Pressure: You don’t need to monitor your water pressure precisely (it can be different in every home). However, if water pressure drops significantly when you wash dishes or take a shower, check and clean faucet aerators if necessary. If that doesn’t help or you’re unsure why the pressure is dropping, you might have a pipe or water main break. Subtler changes in pressure can precede a major issue, so call a plumber before there’s an emergency.
  • Schedule Routine Maintenance: You can do some plumbing maintenance yourself, such as winterizing outdoor pipes with insulation or draining and storing hoses indoors. However, a plumbing inspection allows a technician to do tasks that should be left to a professional; they can potentially diagnose a problem before it causes an emergency. Your water heater also needs maintenance. The tank should be flushed of sediment annually to prevent the tank from rusting, overheating, or cracking.
  • Be Diligent About Wear and Tear: Pipes and plumbing fixtures have a finite lifespan and will begin to wear out at some point. Fortunately, most can be quickly and easily replaced by a professional. If you notice a fixture is malfunctioning or a pipe or other component appears worn out, schedule a repair. Otherwise, you may need to call an emergency plumbing service sooner than you think.

Call Restorerz to Minimize Property Damage in an Emergency

When your home or business is flooded, you may need more than emergency plumbing help. Water can do a lot of damage in little time and may trigger sanitary and safety concerns. Available 24/7, Restorerz – Emergency Services arrives quickly, provides a complete inspection, and has the expertise and equipment to quickly dry out and restore your property. Satisfaction is guaranteed, and we work with all insurance companies. Call (323) 366-3390 to get started.

Can a Moisture Barrier Avoid Mold Remediation?

Mold can grow due to water damage or the presence of moisture, but can a moisture barrier reduce the need for mold remediation? The amount of damage mold can cause is significant. Even more concerning are the health effects it can have. Since mold spores require moisture to settle and grow, waterproofing your home can protect it. A moisture barrier provides just the solution to prevent water entry, which may lead to mold remediation in Los Angeles.

How Does a Moisture Barrier Work?

Moisture barriers are effective at keeping out liquid water. They’re often used to prevent water from seeping into a house from the ground. A vapor barrier, on the other hand, is designed to keep out water that’s in a gaseous state. Each barrier is classified based on its level of permeability (perms) and as follows:

  • Class I: At 0.1 perms or less, this is considered impermeable and is the strongest type of moisture barrier. It’s often made of sheet metal, rubber, polyethylene, or glass.
  • Class II: Rated at greater than 0.1 perms and less than or equal to 1.0 perms, these semi-permeable membranes let through some moisture. They can be plywood, bitumen-coated kraft paper, 30-pound asphalt-coated paper, unfaced or extruded polystyrene, or 0.0031-inch thick latex paint.
  • Class III: Rated greater than 1.0 perms and less than or equal to 10 perms, this class of moisture barriers is the most permeable. They’re often made of gypsum board, fiberglass insulation, concrete blocks, or 15-pound asphalt-coated paper.

Where Is a Moisture Barrier Installed?

Moisture barriers are often installed in exterior walls, crawlspaces, and basement floors. They may also be placed on subfloors, especially when wood is laid over concrete. Ground moisture seeping up into overlying materials can create a hidden breeding ground for mold. It can damage the wood above a concrete layer, and if you live in a colder climate, freezing and thawing can also damage concrete. Therefore, a moisture barrier can not only avoid the need for mold remediation but also costly repairs.

Moisture Barriers vs. Vapor Barriers

Moisture and vapor barriers are classified in the same way. However, a vapor barrier restricts the flow of moisture rather than keeps it out. However, limiting the flow of moisture and gas into a home is beneficial in a structure where indoor and outdoor temperatures are dramatically different. Therefore, the barrier is often used in hot climates, where it should be installed closer to a structure’s exterior; in cold climates, it’s best placed closer to the inner surface of an exterior wall. 

The general idea is to prevent temperature variances from creating condensation that can lead to mold. Aside from exterior walls, vapor barriers may also be installed in walls surrounding humid areas such as bathrooms, hot tubs, or pools.

Why the Difference Is So Important

It’s important to know the type of barrier you need in terms of mold remediation and protection. A professional can assess your home and determine whether you require a vapor or moisture barrier. If you use the wrong type of barrier, it will fail. Or, if it’s put on the wrong side of the wall, mold can grow inside the wall. Even a small hole or gap in the barrier can result in big problems, so it’s important to hire a professional for advice and installation.

Do I Need a Moisture Barrier?

Most homeowners don’t know their moisture barrier requirements. But we all know mold is bad. If your home is susceptible to water or moisture damage, it can be a conducive environment for mold to grow. Your climate doesn’t have to be excessively hot and humid or extremely cold. However, the environment determines the best type of barrier and where to install it.

If humidity is generated from inside your home, the barrier should be placed between the insulation and drywall. However, if humid air is on the outside, the barrier is best placed inside the exterior wall, between it and the insulation (to keep insulating materials dry). Preventing moisture entry indeed helps reduce the risk of mold and needing a remediation professional.

A moisture barrier also affords other benefits besides mold protection. It can also block termites, carpenter ants, and other insects that can damage your home. Water entry, mold, and insect infestations can all lead to significant property damage and compromise structural integrity.

Call Restorerz for Mold Remediation and Prevention Advice

Restorerz is a leading provider of mold remediation, property restoration, and water damage cleanup in Southern California. We’re available 24/7 to address emergencies. Our team is certified to perform any tasks required to make your property habitable again. We can also take measures to prevent or reduce the risk of issues in the future. To request assistance with competitive pricing and your satisfaction guaranteed, call (323) 970-4761 today.